FALCHEM DISPERSE WATER BASED
- Water based with no flash point
- Non-irritating to skin
- Works well with sea of fresh water
- Very effective & economical use
- Approved by Maritime and PSA authority
FALCHEM DISPERSE uses non-ionic surfactant formulation with exceptional dispersing strength when applied with agitation can break up oil slicks, grease masses, sludge, general dirt and grime to leave a high clean surface. Suitable for use at sea, river, docks or in port where petroleum based products are not allowed.
OIL SPILL ON WATER SURFACE:
Direct a hard coarse spray surface at the surface of the spill with nozzle pressure of 80 to 100psi, continually move the stream of water over the spill.
OIL & FUEL FIRES
Handle the same as for dispersing oil spills, moving a narrow coarse spray over burning fuel surface. In emergencies, foam pick up nozzles may be used. But air intake at the nozzle should be covered to give a harder stream of water.
OIL & FUEL SPILL ON SOLID SURFACES
Wash off the spill by directing a hard course stream of FALCHEM DISPERSE directly at the surface and rinse off spill. Alternatively, work the dispersant over the spill surface and rinse off with strong jets of water.