FALCHEM STEELKLEEN STAINLESS STEEL BURN MARK REMOVER
TYPICAL PHYSICAL PROPERTIES
Color : Clear
Specific gravity (25°C) : 1
Flash Point : Not applicable
FALCHEM STEELKLEEN can be used for the pickling and passivating e.g. welding seams, but also for large surface where practical reason in liquid cannot be applied.
1) Brush surface – brush thoroughly with stainless steel brush.
2) Degrease – degrease all surfaces thoroughly with Falchem renovate or solvate 610.
3) Apply Falchem Steelkleen – apply Falchem Steelkleen in think layer by nylon brush
4) Wait – leave for at least 45mins
5) Wash – remover with wet cloth and flush with clean water
6) Always flush thoroughly with water and check pH to ensure neutral