• 
  Water based with no flash point
• 
  Non-irritating to skin
• 
  Works well with sea of fresh water
• 
  Very effective & economical use
• 
  Approved by Maritime and PSA authority

FALCHEM DISPERSE uses non-ionic surfactant formulation with exceptional dispersing strength when applied with agitation can break up oil slicks, grease masses, sludge, general dirt and grime to leave a high clean surface. Suitable for use at sea, river, docks or in port where petroleum based products are not allowed.

OIL SPILL ON WATER SURFACE:

Direct a hard coarse spray surface at the surface of the spill with nozzle pressure of 80 to 100psi, continually move the stream of water over the spill.

OIL & FUEL FIRES

Handle the same as for dispersing oil spills, moving a narrow coarse spray over burning fuel surface. In emergencies, foam pick up nozzles may be used. But air intake at the nozzle should be covered to give a harder stream of water.

OIL & FUEL SPILL ON SOLID SURFACES

Wash off the spill by directing a hard course stream of FALCHEM DISPERSE directly at the surface and rinse off spill. Alternatively, work the dispersant over the spill surface and rinse off with strong jets of water.