TYPICAL PHYSICAL PROPERTIES
Color : Clear
Specific gravity (25°C) : 1
Flash Point : Not applicable

FALCHEM STEELKLEEN can be used for the pickling and passivating e.g. welding seams, but also for large surface where practical reason in liquid cannot be applied.

Welding seams:
1) Brush surface – brush thoroughly with stainless steel brush.
2) Degrease – degrease all surfaces thoroughly with Falchem renovate or solvate 610.
3) Apply Falchem Steelkleen – apply Falchem Steelkleen in think layer by nylon brush
4) Wait – leave for at least 45mins
5) Wash – remover with wet cloth and flush with clean water
6) Always flush thoroughly with water and check pH to ensure neutral